PowderSafe™ Type C Enclosure
AirClean® Systems Type C PowderSafe™ balance enclosure incorporates the airflow dynamics and HEPASafe™ features of the PowderSafe™ Type B with user-friendly features and chemical fume containment capabilities of the ductless fume hood. Thermally fused polypropylene makes the PowderSafe™ Type C enclosure perfect for solvent weighing and manipulation and enclosing powder weighing equipment. Fitted with the AirSafe™ automatic safety controller, the Type C PowderSafe™ has an even laminar flow airstream for accurate weighing.
AC780C Type C with white base and disposal port. The optional disposal port minimizes potential operator exposure from used weighing vessels.
Features
- AirSafe™ automatic safety controller
- Horizontal laminar airflow pattern
- Chemically impervious construction
- Available in 36", 48" and 72" widths
- SafeChange™ filter change out
- High mass - solid polypropylene construction
- Optional dark blue base
- Bonded carbon multipurpose filtration
- Vapor-proof fluorescent light
- No installation required
- Optional disposal port for weighing container
- 110V and 220V AC versions
The entire rear wall of the enclosure is a filtration zone; a clean sweep of all particulate and gases is achieved. This design feature makes the Type C PowderSafe™ ideal when weighing the lightest powders or the heaviest solvents.
AC760C in use
Typical Applications
- Pharmaceutical compounding
- Bulk packaging
- Powder weighing
- Mail Handling Operations
- Animal necropsy
- R&D of pharmaceutical compounds
- Animal surgery
- Soldering
- Cover Slipping
- Pipetting
- Staining
- Chemical transfer
- Titrating
- Slide preps
- Microscopy
- Anesthesia procedures
- Food Testing
AirSafe™ Features
PowderSafe™ Type C is equipped with the AirSafe™ Automatic Safety Controller. Incorporating a combination of airflow monitoring and gas detection the AirSafe™ automatic safety controller allows you to breathe easier knowing your safety is constantly monitored.
Airflow Monitoring - The AirSafe™ automatic safety controller constantly monitors the airflow and displays the actual instantaneous face velocity on an alphanumeric display. The monitor uses a special sensor developed by AirClean® Systems which, unlike traditional anemometers, poses no safety threat the the operator.
Gas Detection/Filter Monitor - A solid state hydrocarbon detector warns the user of filter breakthrough.
HEPA Filter Monitor - The HEPA filter monitor continuously monitors HEPA filter life and alerts user when the HEPA filter requires change out.
| Dimensions | ||||||
| AC760C | AC765C | AC770C | AC775C | AC780C | AC785C | |
| EXTERNAL DIMENSIONS | ||||||
| Width | 36" | 36" | 48" | 48" | 72" | 72" |
| Depth | 30" | 30" | 30" | 30" | 30" | 30" |
| Height | 44" | 54" | 44" | 54" | 44" | 54" |
| INTERNAL DIMENSIONS | ||||||
| Width | 35" | 35" | 47" | 47" | 71" | 71" |
| Depth | 25" | 23" | 23" | 23" | 23" | 23" |
| Height | 25" | 35" | 25" | 35" | 25" | 35" |
Other PowderSafe™ Products
PowderSafe™ Type A - Ideal for use with known low-toxicity compounds.
PowderSafe™ Type B - Designed for use with known and unknown toxic or potent compounds.
PowderSafe™ Bulk Handling Enclosure - Designed for bulk handling of known and unknown toxic or potent compounds.
