AirSafe^™ Automatic Safety Controller

AirSafe™ microprocessor controller is UL, CSA, and CE certified.

The AirSafe™ automatic safety controller provides operator protection 24 hours a day. Incorporating a combination of airflow monitoring, filter monitoring, and gas detection the AirSafe™ automatic safety controller allows you to breathe easier knowing your safety is being constantly monitored.™

Airflow Monitoring - The AirSafe™ automatic safety controller constantly monitors airflow and displays the actual instantaneous face velocity on an alphanumeric display. The controller uses a special sensor developed by AirClean^® Systems which, unlike traditional anemometers, poses no safety threat to the operator.
Automatic/Manual Setting - In automatic mode the unit is set to maintain a constant face velocity. In manual mode the face velocity is controlled by the operator.
Airflow Alarm - A low airflow alarm may be set and displayed. An audible and visible alarm alerts the user if there is insufficient airflow.
Gas Detection/Filter Monitor - A solid state electronic gas detector warns the user of filter breakthrough.
Timer - A digital countdown lab event timer may be preset by the operator and used to time general lab functions.
Chemical Pump - An optional chemical transfer pump may be directly controlled by pressing the quick key button.
AUX Control - Any 110V 10 amp or 220V 5 amp device may be connected and powered on and off via the safety controller. This is particularly useful for switched outlets or transfer devices (requires configuration at purchase).

BLOWER: Turns remote blower on/off if activated.

PUMP: Activates and deactivates pump and pump timer if included.

LIGHT: Turns light on or off.

TIMER: Displays elapsed time and alarms at cycle end.

AUXILIARY: Activates optional features as described above.

ALARM: Silences alarm while continuing to visibly indicate alarm status.

POWER: On/Off.

AirSafe™ Automatic Safety Controller

AirSafe^™ Automatic Safety Controller