The Fume Control Experts - AirClean Systems

Home > News & Press > 36″ deep Polypropylene Sliding-Sash

AirClean® Systems polypropylene sliding-sash ductless fume hoods are now available in 36″ deep models.

October 11th, 2011

Download this press release:

MS Word // 37kb
PDF // 17kb

Press-Quality Photos:

AC4000S 36-inch deep polypropylene sliding-sash on base cabinet

AC4000S 36″ deep Polypro Sash on base cabinet
2232x3687px // .JPG // 3.39mb

AC4000S 36-inch deep polypropylene sliding-sash

AC4000S 36″ deep Polypro Sash
2208x2436px // .JPG // 2.73mb

RALEIGH, NORTH CAROLINA – AirClean® Systems AC4000S-Series Laminar Flow Clean Benches upgrade to dual-wall design.

AirClean® Systems’ ductless fume hood lineup has been further expanded to provide lab designers with a generous range of options without the need for costly customization. Based on AirClean® Systems’ proven 30″ depth design, the new 36″ depth is available in AirClean® Systems 3-, 4-, 6- and 8-foot wide folding-sash ductless fume hood models.

These 30″ and 36″ deep polypropylene ductless fume hoods utilize a unique gas phase bonded carbon filter. This filter, found only in AirClean Systems safety products, eliminates filter dusting and dead zones associated with traditional granular carbon filters. Each unit features a microprocessor-based automatic safety controller, keeping constant check on airflow and filter quality, and alerting the operator in the event of filter saturation.

AirClean Systems’ ductless fume hoods feature many of the features found on traditional total exhaust hoods, namely dual-wall construction for plumbing and mounting fixtures, and vertical sliding safety glass sash. However, the seamless polypropylene construction is chemically resistant and will not rust.

All hoods are designed to house up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and chemical fumes. For high evaporation or multiple chemical applications, a full 7 inch stack of carbon filtration may be recommended.

AirClean® Systems ductless fume hoods meet and exceed relevant OSHA and ANSI Z9.5 standards.

Find more product information at http://www.aircleansystems.com/OP_PHoods.htm.

AirClean® Systems
Contact: Amanda Markovitch
3248 Lake Woodard Drive
Raleigh, NC 27604 USA
Phone: (919) 255-3220
Toll Free: (800) 849-0472
Fax: (919) 255-6120
Email: info@aircleansystems.com
http://www.aircleansystems.com/