FORENSIC CONTAINMENT

CyanoSafe™ Filtered Cyanoacrylate Fuming Chamber

CyanoSafe™ Filtered Cyanoacrylate Fuming Chamber

Safe and automated latent fingerprint development

 

PRODUCT DESCRIPTION

The CyanoSafe Filtered Cyanoacrylate Fuming Chamber is designed to safely and effectively process evidentiary items using the cyanoacrylate fuming method. It provides a controlled environment for the processing of latent fingerprints on most non-porous surfaces while eliminating personnel exposure to hazardous cyanoacrylate fumes. The CyanoSafe utilizes solid-state heating elements that accelerate cyanoacrylate polymerization while providing proper humidity levels inside the chamber.

Once the cyanoacrylate has been placed into the heating tray, simply press the button labeled "PROCESS" on the automatic controller. The chamber locks down and a humidity sensor is activated as the fuming process begins. Once the desired results are achieved the operator simply presses "PURGE" which automatically removes all harmful cyanoacrylate fumes from the chamber.

 

FEATURES

  • Integral vapor-proof fluorescent lighting
  • Built-in solid state gas detection
  • No installation required - plugs directly into a standard 110V or 220V electrical outlet
  • Chamber lock-out during processing to prevent accidental cyanoacrylate exposure
  • Cyanoacrylate accelerator with automatic temperature shut-off
  • Automated processing time of up to 59 minutes
  • Recirculation fans assure even distribution of cyanoacrylate fumes and humidity
  • Hanging rods and clips
  • Control clip provided for hanging test print card
  • Lab event timer
  • AirSafe™ Cyano Automatic Safety Controller
  • Filter safety lockout to ensure correct filter replacement
  • Brushless, sparkless blower is post-filter
  • Filter and electronics are located above the workspace, eliminating the chance of a chemical spill entering these sensitive areas
  • Shipped fully assembled
  • Tested to UL 61010-1 and CSA C22.2 No. 61010-1
  • Real time monitoring of installed filtration bed

 

HOW IT WORKS

CyanoSafe™ Filtered Cyanoacrylate Fuming Chamber Airflow Diagram

CyanoSafe™ Filtered Cyanoacrylate Fuming Chamber Airflow

  1. A
    Once automated processing begins, cyanoacrylate and water vapor are pulled into the rear baffle and circulated throughout the enclosure.
  2. B
    At cycle end, room air is pulled into the enclosure.
  3. C
    Chamber air is mixed with room air.
  4. D
    Cyanoacrylate fumes are captured in the bonded carbon filter.
  5. E
    Clean air is recirculated into the room.

 

DIMENSIONS

Product # External
Width Depth Height
CAS3030"30"54"
CAS30T30"30"82"
CAS4848"30"54"
CAS48T48"30"82"
CAS60T60"30"82"
CAS72T72"30"82"
Product # Internal
CAS3029"25"36"
CAS30T29"25"64"
CAS4847"25"36"
CAS48T47"25"64"
CAS60T59"25"64"
CAS72T71"25"64"

 

CERTIFICATIONS

UL-CSA certification

  

Copyright © 2016 AirClean® Systems, Inc. All Rights Reserved.