The downflow microscope enclosure provides a clean work environment and a UV light for irradiation between processes. UVTect™ microprocessor controller provides one-touch operation of all enclosure features. This configuration does not provide operator protection.
|No ductwork required|
|No installation required - plugs directly into a standard 110V or 220V electrical outlet|
|Encloses equipment while retaining full operator access|
|UVTect® microprocessor controller|
|ISO 5 vertical laminar flow air|
|UV and fluorescent lights|
|Seamless plastic design -no joints or gaps in construction|
|Lab event timer|
|HEPA filtration for capture of particulate to 0.3 microns in size|
|Digital UV light timer :01-59 minutes|
|Filter safety lockout to ensure correct filter replacement|
|Polycarbonate and polypropylene design reflects UV energy|
|Tested to UL 61010-1,CSA C22.2 No. 61010-1, and EN 61326-1|
|Brushless, sparkless blower is post-filter|
|Filter and electronics are located above the workspace, eliminating the chance of a chemical spill entering these sensitive areas|
|Real time monitoring of installed filtration bed|
|Fluorescent lighting optional on all 32" width workstations; standard on 48" workstations|
Room air enters and is cleaned via electrostatic pre-filtration
Air then moves downward through the HEPA filter.
Clean vertical laminar flow air enters the chamber.
Clean air is recirculated into the room.