The upflow microscope enclosure protects the operator from gases, fumes or particulate with bonded carbon or HEPA filtration. AirSafe™ automatic safety controller constantly monitors filter and airflow conditions and allows one-touch control of all enclosure features. This configuration does not provide process protection.
|AirSafe® automatic safety controller|
|No ductwork required|
|No installation required - plugs directly into a standard 110V or 220V electrical outlet|
|Encloses equipment while retaining full operator access|
|Lab event timer|
|HEPA filtration for capture of particulate to 0.3 microns in size|
|Gas phase bonded carbon filtration|
|Filter safety lockout to ensure correct filter replacement|
|Electronic gas detection for real-time gas phase filter monitoring|
|Tested to UL 61010-1,CSA C22.2 No. 61010-1, and EN 61326-1|
|Brushless, sparkless blower is post-filter|
|Filter and electronics are located above the workspace, eliminating the chance of a chemical spill entering these sensitive areas|
|Low airflow alarm warns the user both visually and audibly|
|Real time monitoring of installed filtration bed|
|Fluorescent lighting optional on all 32" width workstations; standard on 48" workstations|
Room air flows away from the operator and enters the enclosure in a horizontal pattern.
Air mixes with gases and particulate.
Contaminated air is directed through the filtration bed.
Clean air is recirculated into the room.